All decoys are warranted for full replacement at date of purchase to work and operate. If you have purchased a decoy and that doesn’t operate. Send back to factory with receipt of date of purchase and a new decoy will be sent to you immediately.

The Ure-a-Duck Decoys surfaces are hand painted. Avoid situations that will cause the paint to chip or scratch off. If the decoy becomes unrecognizable from loss of paint, the factory will repaint for a fee of $ 25.

The Ure-a-Duck Decoy is weather resistant. Normal hunting conditions of rain, snow, sleet, will not affect the operating system. If used in wet weather, be sure to place decoy in a dry environment as soon as hunt is over.

Try to avoid submersion. The Ure-a-Duck decoy is not warranted against submersion. If dropped in the water take batteries out immediately! Dry the battery compartment and blow water away from the switch and from under the wing in the drive assembly area. Replace the batteries and turn switch back on and run for a minimum of 60 minutes to dry out working parts from friction.

The wings are made of a synthetic cloth. Under normal hunting conditions the wings should last for 2-3 seasons. Replacement wings are available for a cost of $10 a pair. When replacing tear the wing off of the plastic frame slowly. Tear from the body toward the wing tip. Place super glue gel along the top of the frame and glue new wing in place. Put wing on it farthest stroke down and glue to body.

If submersed or plastic Drive parts break, the factory will replace the complete drive Assembly at cost. Send the whole decoy to the factory and a complete drive assembly with wings will be installed for $35, which includes return shipping.

Send Decoys for repair to:
Ure-a-Duck Decoy Company
5080 Grifton Hugo Road
Grifton, NC 28530
Please include or phone# and return shipping address